NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual page 213

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Port-Channel
Name
Link State
Admin Mode
Hash Mode
Link Trap Mode
STP Mode
Mbr Ports
Port Speed
Type
Active Ports
Port-Channel/LAG (802.3ad) Commands
The name of this port-channel (LAG). You may enter any
string of up to 15 alphanumeric characters.
Indicates whether the Link is up or down.
May be enabled or disabled. The factory default is enabled.
Displays the hashing algorithm for the port-channel (LAG).
This object determines whether or not to send a trap when
link status changes. The factory default is enabled.
The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
A listing of the ports that are members of this port-channel
(LAG), in unit/slot/port notation. There can be a maximum of
eight ports assigned to a given port-channel (LAG).
Speed of the port-channel port.
This field displays the status designating whether a particular
port-channel (LAG) is statically or dynamically maintained.
Static - The port-channel is statically maintained.
Dynamic - The port-channel is dynamically maintained.
This field lists ports that are actively participating in the port-
channel (LAG).
v3.0, January 2008
12-7