NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual page 186

Prosafe 7300s series layer-3 stackable switches,software version 7.1, command line interface reference
Hide thumbs Also See for FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
When the optional parameters "Option1", "Option2" and/or "Option3" are used, an
ordered list of methods are set in the authentication login list. If the authentication login
list does not exist, a new authentication login list is first created and then the
authentication methods are set in the authentication login list. The maximum number of
authentication login methods is three. The possible method values are
and
.
reject
The value of
local
authentication. The value of
authenticated using the RADIUS server. The value of
authenticated.
To authenticate a user, the first authentication method in the user's login (authentication
login list) is attempted. The 7300S Series Stackable Switch software does not utilize
multiple entries in the user's login. If the first entry returns a timeout, the user
authentication attempt fails.
Note: The default login list included with the default configuration can not be
Format
Mode
11.1.1.1 no authentication login
This command deletes the specified authentication login list. The attempt to delete fails if
any of the following conditions are true:
The login list name is invalid or does not match an existing authentication login list
The specified authentication login list is assigned to any user or to the non configured
user for any component
The login list is the default login list included with the default configuration and was
not created using 'authentication login'. The default login list cannot be deleted.
Format
Mode
11-2
indicates that the user's locally stored ID and password are used for
radius
changed.
authentication login <listname> [method1 [method2
[method3]]]
Global Config
no authentication login <listname>
Global Config
v3.0, January 2008
indicates that the user's ID and password will be
reject
Port-Based Access and Authentication Commands
local, radius
indicates the user is never

Advertisement

Table of Contents
loading

Table of Contents