Show Stack-Port Counters; Show Stack-Port Diag - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

17.2.4 show stack-port counters

This command displays summary data counter information for all interfaces.
Format
Mode
Unit
Interface
Tx Data Rate
Tx Error Rate
Tx Total Error
Rx Data Rate
Rx Error Rate
Rx Total Errors

17.2.5 show stack-port diag

This command shows front panel stacking diagnostics for each port and is only intended
for Field Application Engineers (FAEs) and developers. An FAE will advise on the
necessity to run this command and capture this information.
Format
Mode
Unit
Interface
Diagnostic
Entry1
Diagnostic
Entry2
Diagnostic
Entry3
17-12
show stack-port counters
Privileged EXEC
Displays the unit number.
Displays the slot and port numbers.
Trashing data rate in megabits per second on the stacking
port.
Platform-specific number of transmit errors per second.
Platform-specific number of total transmit errors since
power-up.
Receive data rate in megabits per second on the stacking port.
Platform-specific number of receive errors per second.
Platform-specific number of total receive errors since power-
up.
show stack-port diag
Privileged EXEC
Displays the unit number.
Displays the slot and port numbers.
80 character string used for diagnostics.
80 character string used for diagnostics.
80 character string used for diagnostics.
v3.0, January 2008
Stacking Commands