Show Forwardingdb Agetime; Show Mac-Address-Table Multicast - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.4.9 show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the
parameter is required.
all]
Default
Format
Mode
Forwarding DB
ID
Agetime

4.4.10 show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If you
enter the command with no parameter, the entire table is displayed. You can display the
table entry for one MAC Address by specifying the MAC address as an optional
parameter.
Format
Mode
MAC Address
Type
Component
Description
4-22
all
show forwardingdb agetime [fdbid | all]
Privileged EXEC
Forwarding database ID indicates the forwarding database
whose aging timeout is to be shown. The all option is used to
display the aging timeouts associated with all forwarding
databases.
In an IVL system, this parameter displays the address aging
timeout for the associated forwarding database.
show mac-address-table multicast <macaddr>
Privileged EXEC
A multicast MAC address for which the switch has forward-
ing and or filtering information. The format is two-digit hexa-
decimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will
be displayed as a MAC address and VLAN ID combination
of 8 bytes.
This displays the type of the entry. Static entries are those that
are configured by the end user. Dynamic entries are added to
the table as a result of a learning process or protocol.
The component that is responsible for this entry in the Multi-
cast Forwarding Database. Possible values are IGMP Snoop-
ing, GMRP, and Static Filtering.
The text description of this multicast table entry.
v3.0, January 2008
Port and System Setup Commands
[fdbid |