Spanning-Tree Hello-Time; Spanning-Tree Max-Age - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
5.1.8.1 no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value of 15.
Format
Mode

5.1.9 spanning-tree hello-time

This command sets the Admin Hello Time parameter to a new value for the common and
internal spanning tree. The hello time
10, with the value being less than or equal to (Bridge Max Age / 2) - 1.
Default
Format
Mode
5.1.9.1 no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal
spanning tree to the default value.
Format
Mode

5.1.10 spanning-tree max-age

This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to 2 x (Bridge Forward Delay - 1).
Default
Format
Mode
5.1.10.1 no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning
tree to the default value of 20.
Format
Mode
Spanning Tree Protocol Commands
no spanning-tree forward-time
Global Config
is in whole seconds within a range of 1 to
<value>
2
spanning-tree hello-time <1-10>
Interface Config
no spanning-tree hello-time
Interface Config
20
spanning-tree max-age <6-40>
Global Config
no spanning-tree max-age
Global Config
v3.0, January 2008
5-5