Avoiding Jams; Paper Tray Recommendations; Paper Recommendations; Loading Trays - Ricoh M126 Service Manual

Laser printer
Table of Contents

Advertisement

8
Touch Submit to save your selection.
Submitting Selection appears, followed by the Paper menu.
9
Touch
to return to the home screen.

Avoiding jams

The following hints can help you avoid jams:

Paper tray recommendations

Make sure the paper lies flat in the paper tray.
Do not remove the paper tray while the printer is printing.
Do not load the paper tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it.
Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
Make sure the guides in the paper tray or the manual feeder are properly positioned and are not pressing too tightly
against the paper or envelopes.
Push the paper tray in firmly after loading paper.

Paper recommendations

Use only recommended paper or specialty media.
Do not load wrinkled, creased, damp, bent, or curled paper.
Flex, fan, and straighten paper before loading it.
Do not use paper that has been cut or trimmed by hand.
Do not mix paper sizes, weights, or types in the same stack.
Make sure all sizes and types are set correctly in the printer control panel menus.
Store paper per the manufacturer's recommendations.

Loading trays

1
Pull the tray completely out.
Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Loading paper and specialty media
73

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

M127M128Aficio sp 4410sf

Table of Contents