Setting Originals; Setting Originals On The Exposure Glass - Ricoh NC5006 Operating Instructions Manual

SETTING ORIGINALS
Settinq Originals On The Exposure Glass
SETTING ORIGINALS
Setting Originals On The Exposure Glass
If your machine is equipped with the platen cover:
1. Lift the platen cover.
2. Set the original face
posure glass. The
aligned with the rear
Cl
Before pressing the
platen cover.
down on the ex-
original must be
left corner.
Start key, lower the
If your machine is equipped with the dual
1.
Lift the dual job feeder.
2.
Set the
posure
aligned
original face down on the ex-
glass, The original must be
to the rear left corner.
Cl Before pressing
dual job feeder.
the Start key, lower the
job feeder:
4-2