Console Port Pin Assignment
7210 SAS-M Installation Guide
The RJ-45 serial port on the front panel is used to connect to the switch for out-of-
band console configuration. The on-board configuration program can be accessed
from a terminal or a PC running a terminal emulation program.
The pin assignments used to connect to the serial port are provided in
Table 17: Serial Cable Wiring
RJ45
RTS
NC
TXD
GND
GND
RXD
NC
CTS
Pin
1
Used as defined. Should be connected
2
Not used. Should not be connected
3
Used as defined. Should be connected
4
Used as defined. Should be connected
5
Used as defined. Should be connected
6
Used as defined. Should be connected
7
Not used. Should not be connected
8
Used as defined. Should be connected
Appendix B: Pin Assignments
Table
Usage
Page 81
17.