Passwords / Change Of Password; Password For Web-Server Access Only - Panasonic MEW01777 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01777 Rev: -
7.8
7.8.1
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
configurations, on-line status checking, etc. An EBLWin key (5094)
is required to be plugged in the PC.

Passwords / Change of password

Normally the user names and passwords are downloaded / changed via
EBLWin (menu System | User data), i.e. SSD download.
A logged on person (user name) can change his password via menu
H10. If "Safe shutdown of control unit" (menu H8/S5) is done after
that, this password will be valid also after power off, else not.
A password changed via menu H10 (+ H8/S5) will be valid until it is
changed via menu H10 again or it is erased via EBLWin (menu Tools
| Reset user passwords.

Password for web-server access only

Normally a password consists of 6 digits. This allows the same user to
get access to the control unit as well as to the web-server if both are
selected.
If a user should have access to the web-server only, it is possible to
choose a stronger password. It consists of 6 to 10 characters and digits
as well as letters and alphanumeric characters can be used. Note that
the letters are case sensitive.
31