Change Access Code For Service And Maintenance (H8/S6) - Panasonic MEW01091 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01091
31.7
Action
"Access"
Scroll to menu S6.
"A"
Enter the old code, the
new code and the new
code again.
Rev: 3
Change access code for service and
maintenance (H8/S6)
For security reasons, the default code should be changed.
Text in display
Acknowledge SERVICE signal
Change access code for service and
maintenance
Access code: _
New code:
Access code: ****
New code: ****
Incorrect access code, NO change
Change access code for service and
maintenance
NOTE! After change of access code it is recommended do a "Safe
shutdown" of EBL128 (see menu H8/S4). This will save the SSW
data (e.g. the new code) in a Flash ROM (see page 74).
EBL128 Operating Instructions V1.1.x
ACCEPT? S1
ACCEPT? S6
Verify:
Verify: ****
ACCEPT? S6
125
Comments
According to chapter
"Access code for service
and maintenance", see
page 118.
The digits are replaced
(****) in the display.
Wrong access code was
entered. Try again.
Correct access code was
entered. The access code is
now changed and the sub
menu H8/S6 is shown.
Scroll or press "Return" to
menu H8. Scroll or press
"Return" to log off.