Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01777
Rev: -
First alarm: 002-03
Latest alarm: 003-11
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
More than one alarm point activating fire alarm.
Example; fire alarm in zone 002, address 03 (within zone 002) and
nine other fire alarms (of which the latest alarm is 003-11) in four
different zones:
Zone
002-03
User definable alarm text for 002-03.
Menu
Next zone
"
" after the presentation number is automatically added
SMOKE
depending on the type of alarm point (i.e. SMOKE, HEAT, MULTI or
MCP).
User definable alarm text For each alarm point and zone line input
can an individual alarm text be shown (if programmed). Up to 38
characters can be used.
Additional information
First alarm, Latest alarm, Alarm number and number of zones in
alarm.
LEDs "Alarms queued" (L6) blinking (0.4 / 0.4 sec.) are indicating
that more than one fire alarm is activated. To scroll through the alarm
points, use the push button "Alarms queued" (P8).
Next zone. Use the soft key "
zones in alarm.
When scrolling through the zones, the first alarm point activated in the
next zone will be shown. The "
only if there are alarms in more than one zone.
The first alarm will be automatically displayed again, 20 seconds after
the latest time the "Alarms queued" or "
used.
The printer (if available) will print each fire alarm, e.g.:
44
Alarm number 1 (of 10)
Address
SMOKE
4 zones in alarm
" (P5) to scroll through the
Next zone
" button will be available
Next zone
Next zone
" buttons where
Advertisement
Table of Contents
