Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01777
Rev: -
3.2
3.3
3.4
3.5
3.5.1
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
The second power source is a backup battery (2 x 12 V). In the c.i.e.
is space for two 27 Ah batteries. Larger batteries (up to 65 Ah) have
to be placed outside the c.i.e.
The batteries and the power supply are connected to the Main board
(5010), which handles the charging of the batteries, etc. See the
EBL512 G3 Planning Instructions, chapter "Power supply" for more
information.
Software (S/W) versions
Due to continual development and improvement, different S/W
versions can be found. When installing a new control unit in a system
with "older" control units, you might have to upgrade the S/W in the
old control units (or download an older S/W version in the new
control unit). The same S/W version is required in all control units
in a TLON Network.
Documents
The following documents are available:
Planning instructions MEW01776
Operating Instructions (this doc.)
Drawings
Normally, information found in one of the documents is not found in
another document, i.e. the documents complement each other.
For the TLON Network / TLON Manager, Web-server, etc. are
separate documents available.
Applications
The EBL512 G3 system is intended for small, medium and large
installations. The intelligent control units offer the system designer
and end user a technically sophisticated range of facilities and
functions. Programming (PC programs EBLWin, TLON Manager and
EBLWeb) and commissioning of the control units / system is very
easy.
Start with one control unit and later when it is required, add more
units. The TLON Network makes it possible to install the control
units in one building or in different buildings.
PC programs
The following PC programs are used together with the EBL512 G3
system.
EBLWin
The PC program EBLWin is used for programming and
commissioning of one or more control units, i.e. to:
autogenerate, i.e. to identify the units connected on a COM loop
and make default settings, which can be edited, saved and used as
site specific data (SSD).
14
Advertisement
Table of Contents
