Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01777
Write the zone number
and address
(e.g. 003, 01).
"▼"
"►"
↲
"
"
"|"
↲
"
"
"
"
ESC
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
Disable
Zone 003 address 01
Automatic re-enable:
-- Re-enable list (1) ---------------------------------------------
Zone 003 address 01 autom. re-enable at 17:05
Disable --------------------------------------------------------------
Zone _ _ _ address _ _
Automatic re-enable:
Re-enable list (1)
Zone 003 address 01 autom. re-enable at 17:05
Disable
Zone 000 address 00
Automatic re-enable:
B1 Zone or Zone/Address
B2 Output
B3 Output type
B4 Alarm devices
B5 Routing equipment
B6 Alert annunciation function
Escape
menu
NOTE!
The sensor values for disabled analog smoke detectors in NORMAL
mode will not be used for calculation of the week average sensor
value, i.e. only the values saved before and after the disablement will
be used for this calculation.
No
Yes, at 17:05
Change type
of disablement
No
Change type
of disablement
No
Change type
of disablement
97
If the specified zone /
√
unit doesn't exist, it will
be indicated with "X"
instead of "√" and a
beep.
Use the soft key "|" to
toggle between Disable
and Re-enable list.
Select in the Re-enable
"▼"
list
(in this
example there is only
one item) and press
↲
"
".
Re-enabled zone or zone
/ address will disappear
from the list, indicated
with a beep.
Disable (or Re-enable)
another Zone, Zone /
Address or press "
Scroll to another menu
or press "
ESC
"
Escape menu
".
ESC
" or
".
Advertisement
Table of Contents
