Panasonic MEW01777 Operating Instructions Manual page 132

Panasonic Eco Solutions Nordic AB
MEW01777
E.g:
"000001"
"Register"
↲
" "
"|"
↲
" "
" "
ESC
Rev: -
Set base station mode
Set base station 000001 to
--Base station mode (1) -----------------------------------------------
Register, base station 000001
Set base station mode
Set base station _ _ _ _ to
Base station mode (1)
Register, base station 000001
Set base station mode
Set base station 000000 to
A8 Setup wireless detectors
NOTE!
The procedure to set a Base station to the "Unregister" and "Install"
mode respectively (and back to the "Normal state") is the same as for
the "Register" mode.
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
√
Register
Unregister
Install
Register
Unregister
Install
Register
Unregister
Install
130
If the specified Base
station doesn't exist, it will
be indicated by "X" instead
of "√" and a beep.
Use the soft key "|" to
toggle between "Set base
station mode" and the
"Base station mode" list.
Select a Base station in the
list and press "↲ " to go
from Register mode back
to Normal state. The Base
station will disappear from
the list, indicated with a
beep.
The same procedure is
valid for the Unregister
and Install modes.
" " to go back
Press ESC
to menu "A8".
Scroll to another menu or
press " ".
ESC