Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01777
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
L1
L2
L3
L4
L5
L6
L7, L8
L9, L10
L11, L12
L13, L14
Figure 2. The EBL512 G3 front with display; The Fire Brigade
Panel (FBP) is the upper part and the Control Panel (CP) is the
lower part.
The look might vary according depending on
language, country, etc. (A front with texts in English is shown in
the figure).
See also chapter "LED indicators and push
buttons", page 18.
The FBP is used by the fire brigade personnel to see which alarm
point(s) / zone(s) having activated fire alarm and to take required
operational control of the system.
information displayed in the upper part is depending on how many
alarm points / zones having activated fire alarm. In the middle part
will the fire alarms be shown, i.e. one alarm point or one zone together
with a user definable alarm text (if programmed) plus some other
information.
External FBPs are also available.
The CP is used to "communicate" with the system, i.e. for
commissioning, monthly tests, maintenance, etc. To get access to the
system (a menu tree with main and sub menus) and for operational
control of the system, up to ten User names can be used for three
different User level types. A Password (six digits) for each User
2
name is required.
The CP has several system status LEDs and a keypad.
2
The same User names and Passwords (for the different user levels) will be
used for logon to the Web-server.
17
In the graphical display, the
P1
P2
P3
P4 – P7
P8
Advertisement
Table of Contents
