Interlocking Outputs And Inputs (H9); Sub Menu List (C1 - C3); Change Password (H10) - Panasonic EBL512 User Manual

EBL512 G3 - FIRE ALARM SOLUTIONS DAILY USER'S MANUAL

12. INTERLOCKING OUTPUTS AND INPUTS (H9)

a) Log on to the c.i.e.
b) Navigate to menu H9.
c) Press . A sub menu list (C1 – C3) will be displayed.
12.1. SUB MENU LIST (C1 – C3)
C1
Activated interlocking outputs / inputs
C2
Activate / deactivate interlocking output
C3
Disable / re-enable interlocking output

13. CHANGE PASSWORD (H10)

You can only change the password for the user that is currently logged on to the control unit.
a) Log on to the c.i.e.
b) Navigate to menu H10.
Press . The user that is currently logged on to the control unit is shown.
c) Use the keypad to type the old password.
d) Type the new Password. (Six digits. * * * * * *)
e) Verify the new password.
Read only and/or print available.
Activate
By default is Interlocking output area: 000 point: 00 shown. Use keypad to change area/point.
A successful activation is indicated by a beep and a "√". It will also be shown in the "Deactivate list".
Deactivate
Select "Deactivate list". Press
A deactivation is indicated by a beep and it will also disappear from the Deactivate list.
Disable
By default is Interlocking output area: 000 point: 00 shown. Use keypad to change area/point.
A successful disablement is indicated by a beep and a "√". It will also be shown in the "Re-enable list".
Re-enable list
Choose "Re-enable list". Press
A re-enablement is indicated by a beep and it will also disappear from the Re-enable list.
15
.
.