5
Using Color
Printing samplers from a PC
68
Phaser 780 Color Laser Printer
N
O T E
Use the same color correction to print the chart and to print from your application.
Any other color correction selection in the driver causes colors to print differently
than expected.
Installing color correction files
1.
From the printer's CD-ROM, run setup.exe. Select Custom Install.
2.
In the dialog box, select Printer Utilities, select a printer driver, select the
Samplers subdirectory; click Install. Go to the next topic, "Downloading a
color correction file" on page 68.
Downloading a color correction file
N
O T E
You can make the same color correction settings at the printer's front panel.
1.
From the computer's hard disk, open the Phsrtool directory. Open the
Phsr780 subdirectory; select a color correction file:
Automatc.ps
Comrcial.ps
Dic.ps
Euroscal.ps
Fujiprof.ps
Nocorect.ps
Snapress.ps
Srgbdspl.ps
Swopress.ps
Toyo.ps
Vivdcolr.ps
2.
Send to the printer the desired color correction file:
PC users: Use the DOS COPY command.
Workstation users: Send a color correction file to the printer as you
would any PostScript file.