4
Printer Management
Enabling and disabling the Startup Page
60
Phaser 780 Color Laser Printer
You can choose to have a Startup Page print each time the printer is turned on or
reset, or you can disable the Startup Page. There are three methods for
enabling/disabling the Startup Page:
From PhaserLink Printer Management software.
Networking Manual for information on using your web browser to access
the printer.
From utility files.
Download one of the following files from the printer's
CD-ROM:
Macintosh Use the Apple Printer Utility. See page 81 for instructions.
PC Use utility files STARTPG.PS (enables), NOSTRTPG.PS (disables);
see page 82 for downloading instructions.
From the printer's front panel
1.
Press Select; the printer displays the following message:
Printer Menu
Help Pages
2.
Press the right arrow button to scroll to
3.
Press Menu.
4.
Press the right arrow button until the following message appears:
Printer Defaults
Startup Page
5.
Press Menu; the following status message appears, where the asterisk
indicates the current setting:
Startup Page
*On
Select
6.
Press the right arrow button once. Then press
default setting to
7.
Press Exit (the far right button) until Ready appears.
Menu
Printer Defaults
Menu
.
Off
Refer to the PhaserShare
.
to change the
Select