Enabling and disabling the startup page
You can enable and disable printing of the startup page in three ways:
On a PC, send a PostScript language utility file to the printer. For
more information, refer to the Phaser 540 Drivers and Utilities
Printing Reference manual.
On a Macintosh, use the LaserWriter utility.
Through the printer's front panel, according to the following
instructions:
1.
While the Ready message is displayed, press the Menu
button. The printer displays the first item in the setup menu:
Help Pages
<----
2.
Using the left arrow (<--- ) or right arrow (---> ) buttons, scroll
through the selections until the following message appears:
Printer Defaults
<---
3.
Press the Menu button to access the printer defaults settings.
4.
Using the left arrow (<--- ) or right arrow (---> ) buttons, scroll
through the selections until the following message appears:
Startup Page
<---
5.
Press the Menu button to access the startup page settings.
6.
Press the right arrow (---> ) button once for the following
message:
Startup Page:disabled
<---
7.
Press the OK button to disable printing of the startup page.
8.
To return to the top level of the menu, press the
until the printer displays the Ready message.
----->
Menu
--->
Menu
--->
Menu
--->
OK
A
Technical Notes
button
Exit
A-5
User Manual