Tekcolor™ Color Corrections - Tektronix Phaser 750 User Manual

TekColor Color Corrections
™
You can select the TekColor™ Color Correction mode in the following
ways:
1.
From the software driver. (This always overrides the front panel
setting.)
2.
From the printer's front panel. Press Menu, scroll to Print Quality,
press Menu, and select a TekColor™ Color Correction.
Automatic Optimizes colors for each element (text and graphics) on the
page. Best all-purpose selection.
None No color correction applied. Use with printer specific (i.e.,
using the printer's PANTONE® Color chart) PANTONE®
Colors or when no correction is desired.
Vivid Color Produces the brightest possible colors. Makes blue colors
appear less purple. Use when printing transparencies.
sRGB Display Closest match to computer screen colors.
SWOP Press Specification for Web Offset Publications. Use to match U. S.
press standards.
Euroscale Use to match equivalent Imation Matchprint® proofs.
Press
Commercial Use to match commercial Imation Matchprint® proofs. Best
Press choice for comps.
DIC Use to match Dai Nippon printing inks on coated paper.
Toyo Use to match commercial Toyo printing inks on coated
paper.
Use Printer Uses the selection made at the printer's front panel.
Setting
To set a printer default TekColor correction:
At the READY menu, press Menu.
I
Scroll to Print Quality, press Menu.
I
Scroll to TekColor Correction, press Menu.
I
Scroll to the correction, press OK.
I
User Guide
17