Color Corrections - Tektronix Z740/DX - Phaser 740 Extended Color Laser Printer Instruction Manual

6
Using Color

Color corrections

118 Phaser 740 and 740L Laser Printers
The printer provides TekColor Dynamic Correction, which consists of the following
color correction modes:
Color correction mode
Front panel Driver selection
selection
Automatic
Automatic
SWOP Press
SWOP
Euroscale Press
Euroscale
Commercial Press
Commercial
Toyo
Toyo
DIC
DIC
None
None
Vivid Color
Vivid Color
sRGB Display sRGB Display
— Use Printer Setting
—
Monochrome*
—
Raw RGB*
—
Raw CMYK*
*
Available only with a downloadable utility file.
N
O T E
If your printer is on a network and you have changed the front panel settings, tell
other users on the network. The front panel printer settings affect all prints made
with non-Tektronix drivers.
For information on color education, printing ideas, personalized email subscription,
and access to colorize.com, visit the Color Connection web site:
www.colorconnection.tektronix.com
Description
Default setting. Automatically selects the optimum
color correction for speed, vividness, and saturation.
Specification for Web Offset Publications. Typically
used to match U.S. press standards.
Used to match equivalent Imation Matchprint
proofs.
Used to match commercial Imation Matchprint
proofs.
Used to match commercial Toyo printing inks on
coated paper.
Used to match Dai Nippon printing inks on coated
paper.
No correction made to colors.
Produces the brightest possible colors.
Adjusts color to closely approximate the colors on a
standard display screen.
Uses the color correction mode specified in the
printer's front panel setting rather than any printer
driver setting.
Leaves gray as is; converts RGB and CMYK to pure
gray.
Leaves RGB as is; converts CMYK and gray to RGB.
Leaves CMYK as is; converts RGB and gray to
CMYK.
®
®