To Reset The Watch To Factory Settings; Factory Reset Via Flowsync; Factory Reset From The Watch - Polar Electro Vantage V3 User Manual

TO RESET THE WATCH TO FACTORY SETTINGS

If restarting your watch didn't help, you can reset the watch back to factory settings. Note that resetting the watch back
to factory settings empties all personal data and settings from the watch, and you will need to set it up again for your
personal use. All data that you have synced from your watch to your Flow account is safe. You can do the factory reset
via FlowSync or from the watch.

Factory reset via FlowSync

1. Go to flow.polar.com/start
computer.
2. Connect your watch to the computer's USB port.
3. Open settings in FlowSync.
4. Press the Factory Reset button.
5. If you use Flow app to sync, check the list of paired Bluetooth devices on your phone, and remove your watch
from the list if it's there.

Factory reset from the watch

1. On your watch, press the BACK button, and go to Settings > General settings > About your watch.
2. Scroll all the way down and choose Reset data.
After resetting back to factory settings you need
remember to use the same Polar account in the setup you've used before resetting.
and download and then install the Polar FlowSync data transfer software onto your
to set up your watch again, either via mobile or computer. Just
35