Measuring Spo2; Spo2 Measurements In The Polar Flow App - Polar Electro Vantage V3 User Manual

MEASURING SPO2

For accurate measurement, we advise you to wear the watch at least ten minutes before the
measurement. Make sure your hand is not cold and you're wearing your watch snugly. Keep your body still
during the measurement. If you perform the measurement after training, it is recommended to rest for at
least ten minutes before starting the measurement to allow your body to return to its normal state. Perform
the measurement in similar conditions every time.
1. Wear your watch snugly on top of your wrist, about a finger's width from the wrist bone.
2. On your watch, go to Tests > SpO2, and then tap
3. Keep your arm steady and relaxed until the timer runs out.
After the measurement, the following results will be displayed on your watch:
l
l
l
l
You can view your latest result on your watch in
If the test fails, try moving your watch higher on your wrist. You can also try wearing the watch on your
other wrist to see if that helps.

SPO2 MEASUREMENTS IN THE POLAR FLOW APP

Sync your watch with the Polar Flow app to see your SpO2 measurements in the app.
Note that you must sync your watch using the Flow app. SpO2 measurements cannot be synced using the
Polar FlowSync software on your computer.
You can check the SpO2 measurements for the current day from the Diary. Tapping the card opens a more detailed
SpO2 measurement view. Tapping the list icon opens your previous SpO2 measurements in the calendar search view.
Your blood oxygen level as a percentage.
Baseline: When calculating the baseline, the past 5 measurements are taken into
account.
Altitude: Altitude during the measurement.
Verbal description of your blood oxygen level:
SpO2 is below normal (90-94%) -
Tests
Measure
Your SpO2 is normal
Your SpO2 is low (<90%).
> SpO2 > Latest result.
130
now.
(95-100%) - Your