Option B: Set Up With Your Computer; Option C: Set Up From The Watch; Button Functions And Touch Display; Button Functions - Polar Electro Vantage V3 User Manual

Table of Contents

If you're prompted to update the firmware, please plug your watch into a power source to ensure a flawless

update operation, and then accept the update.

OPTION B: SET UP WITH YOUR COMPUTER

1. Go to

flow.polar.com/start

computer.

2. Sign in with your Polar account or create a new one. Plug your watch into your computer's USB port with the

custom cable that came in the box. We'll walk you through the sign-up and setup within the Polar Flow web

service.

Adjust the values by swiping the display and tap to confirm your selection. If you want to return and change a setting at

any point, press the button until you reach the setting you want to change.

Please note that when you do the setup from the watch, your watch is not yet connected with Polar Flow.

Firmware updates for your watch are available only through Polar Flow. To make sure you get to enjoy your

watch and the unique Polar features at their best, it's important that you do the setup later with the Polar

Flow mobile app or in the Polar Flow web service by following the steps in option A or B.

Your watch has five buttons that have different functionalities depending on the situation of use. See the tables below

to find out what functionalities the buttons have in different modes.

and download and then install the Polar FlowSync data transfer software onto your

Table of Contents