Add The Hill Splitter View To A Sport Profile; Training With Hill Splitter - Polar Electro Vantage V3 User Manual

Hill Splitter requires 1 second GPS recording rate. It cannot be used with 1 minute or 2 minute recording
rates.

ADD THE HILL SPLITTER VIEW TO A SPORT PROFILE

By default the Hill Splitter training view is on in all running, cycling and downhill type sport profiles, but it can be added
to any sport profile that uses GPS and barometric altitude.
In the Flow web service:
1. Go to Sport Profiles, and choose edit on the sport profile you wish to add it to.
2. Choose Related to device
3. Choose Vantage V3 > Training views > Add new > Fullscreen > Hill Splitter and save.
In the Flow mobile app:
1. Go to the main menu, and, choose
2. Choose a sport and tap Edit.
3. Add the Hill Splitter training view.
4. When you're ready, tap Done.
Remember to sync the settings to your Polar device.

TRAINING WITH HILL SPLITTER

After starting your session, scroll to the Hill Splitter view with the UP/DOWN buttons. Details you can view during your
session include:
Distance : The distance of the current segment (flat, uphill or downhill)
l
Ascent/descent of current segment
l
Speed
l
Note that there is some delay when switching from a hill to flatland. This is to make sure that the hill is over. Even
though the switch from a hill to flatland shown in the Hill Splitter training view is delayed, the end of the hill is marked
correctly in the data, so when viewing your training summary in Flow web service or app it is shown correctly.
Hill details pop-up
In downhill sports (snowboarding, downhill skiing, backcountry skiing and telemark skiing) you'll get a pop-up with
details from your previous hill after finishing it, and then going back uphill for 15 meters. This is designed so that you'll
get the pop-up when heading back up on a ski-lift.
Sport profiles.
122