Table of Contents
Advertisement
•
Korean
•
Polish
•
Portuguese (Portugal)
•
Russian
•
Spanish (Spain)
For the voice actions to work on your M600, your phone and smartwatch must use the same language!
RESTARTING AND RESETTING
Like with any electronic device, we recommend that you switch off the M600 every now and then.
If you experience problems with your M600, you can try restarting it. Restarting your smartwatch will not delete
any of the settings or your personal data from the M600.
TO RESTART THE M600
1.
Navigate to the Settings
2. Confirm restarting the watch by tapping the check mark icon.
OR
•
Press and hold down the side power button until the Polar logo appears.
Sometimes restarting your electronic device doesn't do the trick. If you, for example, have trouble re-estab-
lishing a lost connection between your M600 and phone, and have first tried our other [troubleshooting tips],
but still can't come to no success, you can reset the M600 to factory settings. Note, however, that resetting emp-
ties all personal data and settings from the M600, and you need to set it up again for your personal use.
TO RESET THE M600 TO FACTORY SETTINGS
1.
Navigate to the Settings
2. Confirm the resetting by tapping the check mark.
After resetting, you need to
UPDATING SOFTWARE
Your Polar M600 is powered by Android wear. You'll get an automatic notification to your M600 if there's a new
Android Wear system update available. The update will download to your M600 when your smartwatch is
plugged in to charge and connected to your phone and your phone has an Internet connection.
You can also check for an available Android Wear software update manually from you smartwatch.
menu, and find and tap Restart.
menu, and find and tap Unpair with phone.
Set up your M600
again.
88
Advertisement
Table of Contents
