Table of Contents
Advertisement
OR
•
Press and hold down the side power button until the Polar logo appears.
Sometimes restarting your electronic device doesn't do the trick. If you, for example, have trouble re-establishing a
lost connection between your M600 and phone, and have first tried our other
them connected again, you can unpair the M600 from your phone and reset the M600 to factory settings. Note, how-
ever, that resetting empties all personal data and settings from the M600, and you need to set it up again for your per-
sonal use.
Android phone users
TO UNPAIR THE M600 AND YOUR PHONE AND TO RESET YOUR M600
1. In the Android Wear app on your phone, open Settings.
2. Under the Device settings, tap Polar M600.
3. Tap UNPAIR WATCH.
4. Confirm the unpairing by tapping UNPAIR WATCH. This will also reset your watch.
TO PAIR THE M600 AND YOUR PHONE AGAIN
1. Open the Android Wear app on your phone.
2. To finish pairing the M600 and your phone again, follow the instructions on the screen or see the instructions
from chapter [Setting up your M600]. Remember to finish setting up your M600 again in the Polar Flow app!
iPhone users
TO UNPAIR THE M600 AND YOUR PHONE
1. In the Settings app on your phone, tap Bluetooth.
2. Find your Android Wear device from the list and tap "i".
3. To unpair, tap Forget This Device.
4. Confirm the unpairing by tapping Forget Device.
TO RESET THE M600 TO FACTORY SETTINGS
1.
Navigate to the Settings
2. Tap Disconnect & reset.
3. Confirm resetting the watch by tapping the check mark icon.
TO PAIR THE M600 AND YOUR PHONE AGAIN
1. In the Android Wear app on your phone, tap the three dots at the top right corner.
2. Tap Pair with new wearable.
3. To finish pairing the M600 and your phone again, follow the instructions on the screen or see the instructions
from chapter [Setting up your M600]. Remember to finish setting up your M600 again in the Polar Flow app!
UPDATING SYSTEM SOFTWARE
Your Polar M600 is powered by Android wear. You'll get an automatic notification to your M600 if there's a new
Android Wear system update available. The update will download to your M600 when your smartwatch is plugged in to
charge and connected to your phone via Bluetooth when your phone has an Internet connection.
app, and find and tap System.
troubleshooting
79
tips, but still can't get
Advertisement
Table of Contents
