Set Display Always On; Set Timers - Polar Electro Vantage V3 User Manual

Heart rate graph and your current heart rate
Average heart rate
Maximum heart rate
Power graph and your current power
Average power
Maximum power
Time of day
Duration
Music controls
For more information, see

SET DISPLAY ALWAYS ON

You can find the Display always on
the watch display will be illuminated throughout your training session.
1. Press the BACK button to pause your session, and then press the LIGHT button to enter the quick menu.
2. Choose Display always
session only, the setting will default back to
sport, the setting will also apply in future training sessions with this sport.
Please note that the always on setting will drain your battery much faster than the default setting, and may also impact
the lifespan of your display. The default settings are optimized for battery life and display longevity.

SET TIMERS

Before you can use timers during training, you need to add the timers to your training views. You can do this either by
setting the timer view on for your current training session from the
views of the sport profile in the Flow web service sport profile settings and syncing the settings to your watch.
Music controls.
setting from the quick menu when the session is paused. With always on chosen
on, and choose Off, For this session only
Off after you finish your training session. If you choose
or For this sport. If you choose
Quick menu or by adding the timers to the training
43
For this
For this