Wrist Ecg Measurement; Performing The Test - Polar Electro Vantage V3 User Manual

Table of Contents

Advertisement

You'll get another alert when you reach the starting point of the segment. Recording of the segment starts
automatically, and both the name of the segment and your personal record time for the segment are shown on your
watch.
The display shows if you are behind or ahead of your personal best (or KOM/QOM if you are doing the segment for the
first time), as well as your speed/pace and distance left.
After you've completed the segment, your watch displays your time, and the difference to your personal best time. The
PR symbol is displayed if you set new personal record.

WRIST ECG MEASUREMENT

Vantage V3 has a wrist ECG sensor that enables electrocardiogram (ECG) signal recording using your watch. The wrist
ECG sensor records the timing and strength of electrical signals generated by your heart using two electrodes, one of
which is on the top left button and the other on the back of the watch. The ECG signal is derived from the voltage
difference between the two electrodes. With the ECG test, you can record your ECG signal at rest in just 30 seconds. As
a result of the test, we give you a graph of your ECG signal, as well as your average heart rate, heart rate variability, beat-
to-beat interval and pulse arrival times (PAT). You can track these to keep an eye on the health of your heart and
arteries.
The wrist ECG measurement allows you to perform
rate variability, without a paired Polar heart rate sensor.
The Wrist-ECG sensor measurement feature is not intended for any medical use, diagnosis or treatment
(including self-diagnosis or consultation with a doctor) and the data should not be used for any medical
purposes.

PERFORMING THE TEST

For accurate measurement, we advise you to wear the watch at least ten minutes before the
measurement. Make sure you wear the watch on the hand chosen in the settings. You can check the
setting from
Settings
sitting down and always at the same time of day. This feature is only intended for measurements taken at
rest.
Orthostatic
>
General settings
>
I wear my watch on (Left hand
test, which is based on measuring heart rate and heart
127
/
Right
hand). Take the test

Advertisement

Table of Contents
loading

Table of Contents