Zoom - Polar Electro Vantage V3 User Manual

Note that GPS must be set on for the sport profile to be able to use these features.
Track back (Go back via the same route)
To set track back on from the Map navigation view:
1. Browse to the Map navigation
2. Choose Back to start, and choose
To set Track back on from the Quick menu:
1. Press BACK to pause your session, and then press the LIGHT button to enter the quick menu.
2. Choose Back to start, and choose
3. If the map navigation view is not included in the training views of the sport profile you are using, it will be added
to the training views for this session.
Follow the guidance on the display to the starting point of your session. On the display you'll see the distance to the
starting point of your session via the route.

Zoom

Zoom in or out on your route. Press
and DOWN buttons to adjust the view. Press OK to accept the new zoom level and exit the Pan and zoom mode. If you
exit the Pan and zoom mode by pressing BACK, the map view will return to the previous zoom level.
Back to start (Go back via beeline)
To set the back to start feature on from the Map navigation view:
1. Browse to the Map navigation
2. Choose Back to start, and choose
To set the back to start feature on from the Quick menu:
1. In pre-training mode, press the LIGHT button or tap
pause your session, and then press the LIGHT button to enter the quick menu.
2. Choose Back to start, and choose
3. If the map navigation view is not included in the training views of the sport profile you are using, it will be added
to the training views for this session.
To return to your starting point via beeline:
Keep your watch in a horizontal position in front of you.
l
Keep moving in order for your watch to determine which direction you are going. An arrow will point in the
l
direction of your starting point.
view and press OK.
Via same route.
Via same route.
OK in the Map navigation
view and press OK.
Via beeline.
Via beeline.
115
view and choose Pan and
to enter the quick menu. During training: Press BACK to
zoom, and then use the UP