Compass; Using The Compass During A Session; Using The Compass Outside Of Training Sessions - Polar Electro Vantage V3 User Manual

COMPASS

To use the compass during sessions you need to add it any sport profiles you wish to view it in. In the Flow web service,
go to Sport Profiles > Choose edit on the sport profile you wish to add it to > go to Related to device and Choose
Vantage V3 > Training views > Add new > Fullscreen > Compass and choose save. Remember to sync the changes to
your watch.

Using the compass during a session

During a session you can scroll to the compass view with the UP/DOWN buttons. The display shows your bearing and
the cardinal directions.
Calibrating the compass
You may be asked to the calibrate the compass during a session. If so, follow the instructions on the display to calibrate
it.
You can also manually calibrate the compass from the quick menu. Pause your session, and press LIGHT to access the
quick menu, and choose Calibrate compass. Follow the instructions on the display.
Perform the calibration while wearing the watch on your wrist.
Lock your bearing
In the compass training view press OK to lock your current bearing. The display will then show the deviation from your
locked bearing in red.
Note that the compass needs to be calibrated first.

Using the compass outside of training sessions

When not training, you can access the compass through the
Choose views. After adding it, swipe left or right from the watch face until you reach the view, and press OK.
Lock your bearing
In the compass view press
bearing in red.
Calibrating the compass
To calibrate the compass scroll all the way down and choose Calibrate.
Perform the calibration while wearing the watch on your wrist.
OK to lock your current bearing. The display will then show the deviation from your locked
Navigation view. Add the navigation view from
120
Settings >