BOMBARDIER Johnson 90 Service Manual page 288

POWER TRIM ANO TILT -140
INSTALLATION
Apply Triple Guard Grease to tilt rod upper bushes @, then
install bushes in tilt rod.
Operate the PTT motor to extend the PTT rod upward.
Align the tilt rod with the hale in the swivel bracket as the tilt
rod extends.
@a
Triple Guard Grease
Apply Triple Guard Grease to the PTT rod upper shaft
( J J,
then insert the shaft through the swivel bracket and tilt rod.
•w111G·~
Triple Guard Grease
Secure the upper shaft with the snap ring @.
Route the PTT motor cable in through the lower cover and
connect the terminals to the PTT relays.
(Cable routing - see WIRING DIAGRAM.)
8-44