BOMBARDIER Johnson 90 Service Manual page 161

POWER UNIT
POWER UNIT
17. Loosen screw
®
and disconnect lead wire from oil pres­
sure switch.
18. Remove two bolts @ and front panel @.
19. Disconnect water inlet hose @ and water outlet hose
®)
from crankcase.
20. Remove cotter pin
®)
and washer
®,
then separate
clutch lever link(@ from clutch shaft arm
®).
21. Remove E-ring @, clutch control lever
®
and clutch shaft
arm@.
22. Remove two bolts
®
and clutch lever holder@.
23. Disconnect neutral switch lead wire connector
®·
6-7