MIO UNIT
DRIVESHAFT HOUSING ANO OIL PAN
3. lnstall lower mount covers to driveshaft housing, then
tighten lower mount cover bolts securely.
BONDING WIRE
Reattach bonding wire to driveshaft housing and tighten
screw securely.
POWER UNIT
1. lnstall power unit. (See page 6-9 to 6-11)
2. Tighten power unit mounting bolts and engine holder
bolts to specified torque.
~
Power unit mounting bolt and Engine holder bolt:
8 mm
23 N-m (2.3 kg-m; 16.5 lb-ft)
10 mm
50 N-m (5.0 kg-m¡ 36.0 lb-ft)
7-12