MID UNIT
DRIVESHAFT HOUSING ANO OIL PAN
OIL PAN TO DRIVESHAFT HOUSING
1. lnstall water tube
G).
2. lnstall two dowel pins
(l)
to driveshaft housing @.
3. Apply sealant to mating surfaces of driveshaft housing
and oil pan.
~ Silicone Seal
4. lnstall oil pan @ to driveshaft housing, then tighten eight
bolts @ securely.
ENGINE HOLDER TO OIL PAN
1. Apply engine oil to O-ring G), then install O-ring to oil
strainer
(l).
2. lnstall oil strainer to engine holder, then tighten bolts
securely.
3. lnstall two (2) dowel pins@ and gasket@to oil pan.
l~CAUTION
1
Do not reuse gasket and O-ring once removed. Always
use new parts.
7-9