4
Working with the Channel Monitor
The Channel Monitor shows the status of call channels. The call channels
are the connections between the server and the switch that carry the call
signals to CallPilot.
To view or work with call channel states
Step
1
2
Copyright © 2007, Nortel Networks
.
IF you want to stop or start
only one or several channels that
are associated with a DSP
Click Courtesy Stop, Stop, or Start as required.
Result: If you clicked Courtesy Stop or Stop, you are asked to
confirm the Courtesy Stop or Stop. Click OK.
The selected channels change to off-duty or on-duty status,
according to the action you chose.
Note: If the buttons are not available, wait a few seconds for the
screen to refresh.
Action
Run CallPilot Manager and log in.
In CallPilot Manager, click Maintenance→Channel Monitor.
Result: The Channel Monitor screen appears, showing the DS30X
(also known as DS0) channels associated with each DS30X link.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Working with the Channel Monitor 63
THEN
select the check box for each
channel that you want to stop or
start.
—End—
Nortel Networks Confidential