About The Media Drive Bay; Removing The Media Drive Carrier From The Chassis - Nortel CallPilot User Manual

About the media drive bay

Media drive bays contain media devices, including CD-ROM, tape, and
floppy drives. If your media drives become damaged or you want to
upgrade, you can replace these drives. This section provides procedures for
replacing or upgrading any device in the media drive bay.
To replace media drives
Step
Perform the procedures in the following order to replace media drives:
1
2

Removing the media drive carrier from the chassis

When replacing the media hard drives, the first step is to remove the media
drive carrier from the media drive bay.
Requirements
To remove the media drive carrier from the media drive bay, you require
the following:
•
•
•
•
Locate the media drives
The media drives (CD-ROM drive, tape drive, and floppy drive) are shown in
the bottom right corner shown in
Copyright © 2007, Nortel Networks
.
Removing the media drive carrier from the chassis 103
Action
"Removing the media drive carrier from the chassis" (page 103)
"Replacing a tape, CD-ROM or floppy drive" (page 106)
keys for the front bezel doors
a Phillips screwdriver
cable identification labels
a pen or pencil
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
—End—
"Media drives" (page 104).
Nortel Networks Confidential