Nortel CallPilot User Manual page 109

Cabling example
To configure the tape drive
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Note: Some settings may already be properly configured. If it is not
clear from the drive manufacturer's documentation how to set jumpers,
contact your Nortel technical support representative.
Action
Set the SCSI ID to 6.
Disable the Active Terminators (Term Enable).
Note: Termination is provided by an active SCSI terminator
that you connect to the end of the SCSI cable (see
example" (page
Enable Parity Checking.
Enable Termination power (TPWR).
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
109)).
Installing a tape drive 109
"Cabling
Nortel Networks Confidential