Conducting Tstserio Tests - Nortel CallPilot User Manual

40 Chapter 5 Using serial port diagnostic tools

Conducting TSTSERIO tests

The TSTSERIO command performs local loopback tests of the serial
communication ports from the server run-time environment.
TSTSERIO command syntax
The syntax for the TSTSERIO command is as follows:
TSTSERIO [/?]
TSTSERIO command parameters
TSTSERIO command parameters
Flag
?
/P:comport
/S:subtstname
/L:loops
Copyright © 2007, Nortel Networks
.
Note: Before conducting these tests, shut down the appropriate
services. See "Shutting down services" (page
CAUTION
Risk of communications loss
By stopping the services on COM1 or COM2, you lose the support
access feature.
CAUTION
Risk of stopping call processing
By stopping the services on COM2, you stop call processing on
CallPilot.
/P:comport [/S:subtstname] [/L:loops]
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Requirement
n/a
Required
Optional
Optional
37).
Description
Displays Help.
Specifies the symbolic
port name assigned to
the port you want to test.
Specifies a TSTSERIO
subtest. See the following
table for a description of
the available subtests.
Specifies the number of
times (up to a maximum
of 65 535) to execute
the requested test. The
default number of tests is
1. A value of 0 infinitely
loops until you enter
Ctrl+C.
Nortel Networks Confidential