Restarting Services - Nortel CallPilot User Manual

Once the plug is installed on the serial port, TSTSERIO can be invoked
according to the procedure outlined in the previous section.

Restarting services

This section describes how to restart the services for COM1 or COM2 after
invoking the TSTSERIO local loopback tests.
Services to restart after COM1 testing
•
Services to restart after COM2 testing
•
•
•
•
•
•
•
Net Start command
Use the Net Start command to restart a specified service on a serial port.
The syntax for the Net Start command is as follows:
net start <service name>
To invoke the Net Start command from Windows
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Routing and Remote Access Service
CallPilot SLEE Service
CallPilot MWI Service
CallPilot Access Protocol Emulator
CallPilot Blue Call Router
CallPilot Call Channel Router
CallPilot Time Service
Routing and Remote Access Service
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type net start "service_name",
and then press Enter.
For example, type net start "Remote Access Server", and
then press Enter.
Note: The quotation marks are required, as in the example
above.
Type Exit, and then press Enter to exit the Command Prompt
window.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Restarting services 43
Nortel Networks Confidential