Nortel CallPilot User Manual page 83

2
3
4
5
Copyright © 2007, Nortel Networks
.
Grasp the molded horizontal handles on the power supply module
and pull the power supply module free from the chassis (see B in
the preceding diagram).
Align the replacement module with the empty chassis bay.
Slide the replacement power supply module into the bay until the
module is secured by its connector. Use some force, if necessary.
Secure the power supply module to the chassis with two
thumbscrews at the corners of the power supply faceplate.
Result: The power supply LED illuminates green.
Note: If the LED does not illuminate, remove and reinstall the
power supply with more force. If this does not work, contact your
Nortel customer support representative.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Replacing the power supply 83
—End—
Nortel Networks Confidential