Nortel CallPilot User Manual page 95

The default and recommended setting is to have only JP3 jumpered (see
"Jumpers on alarm board" (page
and LED display.
Jumpers on alarm board
Jumper descriptions
JP6 - do not change
Leave the jumper installed on JP6.
JP5 - Disarming no power in the bottom bay
If you are operating with one power supply, you can disable sensing of no
power from the bottom power supply. To do this, install a jumper on jumper
block 1, JP5.
Ensure that the functioning power supply is installed in the upper power bay.
Copyright © 2007, Nortel Networks
.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Setting jumpers on the alarm board 95
95)). This setting enables normal sensing
Nortel Networks Confidential