Replacing A Tape, Cd-Rom Or Floppy Drive - Nortel CallPilot User Manual

106 Chapter 9 Replacing media drives
3
4
Replacing a tape, CD-ROM or floppy drive
This section describes how to replace a media drive (tape, CD-ROM, or
floppy drive) in the media drive carrier.
To replace a media drive
Step
1
2
Copyright © 2007, Nortel Networks
.
Hold cables away from the drive bay as you pull the media drive
carrier away from the chassis until the connectors attached behind
the components can be reached.
CAUTION
Risk of equipment damage
To avoid damaging cables during this procedure, ensure
that no cables are crossed when moving the media drive
carrier in and out of the drive bay.
Label and disconnect cables from installed media drives, and then
free the carrier from the chassis.
Action
CAUTION
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive components.
Remove the media drive carrier from the chassis (see
the media drive carrier from the chassis" (page
Remove the faulty drive from the media drive carrier and save the
screws (see the diagrams that follow).
Note: To remove the tape drive or CD-ROM drive, you must
first remove the floppy drive.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
—End—
"Removing
103)).
Nortel Networks Confidential