Restarting The Server - Nortel CallPilot Installation And Configuration Manual

Installing the server and connecting the peripherals

Restarting the server

Introduction
If at any time it is necessary to restart the server, use the following procedure.
To restart the server
1 Press Ctrl+Alt+Delete simultaneously.
Result: The Windows NT Security dialog box appears.
2 Click Shut Down.
Result: The Shutdown Computer dialog box appears.
3 Select Shutdown and Restart.
4 Click OK.
Result: You might be informed that an SQLAnywhere service is running with
connections, and asked if you want to end it.
5 Click Yes or End Task.
Result: You might also be asked if you want to save ACD proxy changes.
6 Click No.
Result: The server shuts down and then restarts.
116
Standard 1.0
CallPilot