Restarting The Server - Nortel CallPilot Installation And Configuration Manual

May 2000

Restarting the server

Introduction
If it is necessary to restart the server, use the following procedure.
To restart the server
1 Press the Ctrl, Alt, and Delete keys simultaneously.
Result: The Windows NT Security dialog box appears.
2 Click Shut Down... .
Result: The Shutdown Computer dialog box appears.
3 Select Shutdown and Restart.
4 Click OK.
Result: You might be informed that an SQLAnywhere service is running
with connections, and asked if you want to end it.
5 Click Yes or End Task.
Result: You might also be asked if you want to save ACD proxy changes.
6
Click No.
Result: The server shuts down and powers down.
Part 2: 200i Server Hardware Installation
Installing the server, cables, and peripheral devices
79