F01D0SA
– As necessary, pull halves of inner sleeve with
long nose pliers.
F01D0TA
1. Pulling inner sleeve half
5, Circlip
Always use new circlips.
-
CAUTION
Always use new circlips. At installation, take
care not to deform them. Circlips must not
move freely after installation.
WARNING
Always wear safety glasses when installing
piston circlips.
1
Subsection 05 (TOP END)
717 and 787 Engines
Secure circlip with its opening located at the bot-
tom of the piston.
-
CAUTION
To minimize the stress on the circlips, it is
important to install them as described.
1
F06D18A
1. Circlip opening at 6 o'clock (at bottom)
947 Engine
Secure circlip in piston groove with its bent end in
piston notch as shown.
F07D0AB
1. Circlip end in piston notch
Section 04 ENGINE
04-05-23
1