BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 120

Section 04 ENGINE
Subsection 06 (BOTTOM END)
2
F00D0MA
1. Keyway
2. Long flange toward the crankshaft counterweight
5, Seal
At seal assembly, apply a light coat of lithium grease
on seal lips.
787 Engine
Position PTO seal against the retaining shim; the
gap between the seal and bearing will ensure
proper lubrication of the bearing.
1
F00D0NA
1. Seal against the retaining shim
947 Engine
Seals are positioned with the outer lip in the crank-
case recess.
04-06-16
1
F06D1LA
1. Seal lip in crankcase recess
6, Drive Pin
Make sure drive pins of bearings are properly in-
stalled in crankcase recesses at assembly.
F00D0OA
1. Drive pins
13, Counterbalance Shaft
787 Engine
Press gear no. 14 onto counterbalance shaft tak-
ing care to align both marks previously traced.
-
CAUTION
Counterbalance shaft must be properly as-
sembled, otherwise engine will vibrate and
premature wear will occur.
1
1