BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 70

947 Engine
1, Cover
Loosen screws no. 2. Remove engine magneto
cover.
1
2
F06D1RA
1. Cover
2. Screw
Remove oil pump shaft from flywheel nut.
F06D23A
1. Remove oil pump shaft
4,5, Rotor and Flywheel
To remove the rotor or the flywheel, the crank-
shaft must be locked. For procedure, refer to
BOTTOM END 04-06.
If necessary, the magneto rotor can be removed
without the engine flywheel. Remove the 6 screws
no. 7.
1
Subsection 04 (MAGNETO SYSTEM)
1
F06D0LA
1. Screw
To remove the flywheel/rotor assembly, unscrew
nut no. 6 counterclockwise when facing it.
F06D0MA
1. Nut
The flywheel is easily freed from crankshaft with
puller (P/N 420 976 235).
Install protective cap (P/N 290 877 414) to crank-
shaft.
Fully thread puller in engine flywheel.
Section 04 ENGINE
1
04-04-9