Section 05 COOLING SYSTEM
Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
1
F01E1TA
1. Tapered needle
Remove the tapered needle from valve housing.
1
F01E20A
1. Remove tapered needle
Pull the valve slightly. Using pliers, release the
clamp which retains the bellows no. 10.
Remove valve no. 9 and bellows no. 10.
05-02-12
F01E21A
Loosen clamp to separate valve from bellows.
1
F01E24A
1. Clamp
Inspection
Inspect parts for damage. Verify especially bel-
lows for cracks.
Assembly
Assembly is essentially the reverse of disassem-
bly procedures.