BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 130

Section 04 ENGINE
Subsection 07 (ROTARY VALVE)
DISASSEMBLY
3, Rotary Valve Shaft
To remove the rotary valve shaft assembly, first
remove snap ring no. 4 from crankcase.
F01D22A
1. Removing snap ring
-
CAUTION
Bottom end must be opened to remove rota-
ry valve shaft.
To remove rotary valve shaft, use the appropriate
puller (P/N 290 876 488).
F01D23B
Place puller over rotary valve shaft end and screw
on puller bolt into shaft. While retaining bolt with
a wrench, turn puller nut CLOCKWISE until shaft
comes out.
04-07-4
1
1. Hold bolt
5,6, Circlip and Spring Seat
If it is necessary to disassemble components of
rotary valve shaft assembly, use seat to compress
spring and remove circlips.
1. Compress seat
2. Remove circlips
F01D61A
F01D27A
F01D25A
1
1
2